Linux version 2.4.18-pre7 (root@blue) (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #5 Wed Feb 20 16:33:44 EST 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000ffec000 (usable) BIOS-e820: 000000000ffec000 - 000000000ffef000 (ACPI data) BIOS-e820: 000000000ffef000 - 000000000ffff000 (reserved) BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 65516 zone(0): 4096 pages. zone(1): 61420 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Kernel command line: auto BOOT_IMAGE=kernelhacking ro root=306 BOOT_FILE=/boot/vmlinuz-2.4.18 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1008.999 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 2011.95 BogoMIPS Memory: 255216k/262064k available (1360k kernel code, 6460k reserved, 423k data, 236k init, 0k highmem) Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: Before vendor init, caps: 0183fbff c1c7fbff 00000000, vendor = 2 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) CPU: After vendor init, caps: 0183fbff c1c7fbff 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000 CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000 CPU: AMD Athlon(tm) Processor stepping 02 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1008.9467 MHz. ..... host bus clock speed is 201.7892 MHz. cpu: 0, clocks: 2017892, slice: 1008946 CPU0 mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xf1140, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware Trying to stomp on VIA Northbridge bug... Unknown bridge resource 0: assuming transparent PCI: Using IRQ router VIA [1106/0686] at 00:04.0 PCI: Disabling Via external APIC routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16) Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: faking semi-colon parport0: Printer, Hewlett-Packard HP LaserJet 1100 parport_pc: Via 686A parallel port: io=0x378 pty: 2048 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Real Time Clock Driver v1.10e WDT driver for IB700 single board computer initialising. eurwdt: can't misc_register on minor=130 block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller on PCI bus 00 dev 21 VP_IDE: chipset revision 16 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1 ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: MAXTOR 6L040J2, ATA DISK drive hdc: CREATIVE CD5220E-F, ATAPI CD/DVD-ROM drive hdd: MATSHITA CD-RW CW-7586, ATAPI CD/DVD-ROM drive hdd: set_drive_speed_status: status=0x40 { DriveReady } ide1: Drive 1 didn't accept speed setting. Oh, well. ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: 78177792 sectors (40027 MB) w/1819KiB Cache, CHS=4866/255/63, UDMA(66) hdc: ATAPI 52X CD-ROM drive, 120kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 ide-floppy driver 0.97.sv Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 hda9 > Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 smc-ultra.c: No ISAPnP cards found, trying standard ones... loop: loaded (max 8 devices) 8139too Fast Ethernet driver 0.9.23 PCI: Found IRQ 5 for device 00:09.0 PCI: Sharing IRQ 5 with 00:04.2 PCI: Sharing IRQ 5 with 00:04.3 eth0: SMC1211TX EZCard 10/100 (RealTek RTL8139) at 0xd0800000, 00:e0:29:83:71:06, IRQ 5 eth0: Identified 8139 chip type 'RTL-8139C' ide-floppy driver 0.97.sv SCSI subsystem driver Revision: 1.00 request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted request_module[scsi_hostadapter]: Root fs not mounted es1370: version v0.37 time 16:06:33 Feb 20 2002 es1371: version v0.30 time 16:06:39 Feb 20 2002 Creative EMU10K1 PCI Audio Driver, version 0.18, 16:06:19 Feb 20 2002 PCI: Found IRQ 10 for device 00:0b.0 emu10k1: EMU10K1 rev 8 model 0x8027 found, IO at 0xa000-0xa01f, IRQ 10 ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.268 $ time 16:07:13 Feb 20 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 5 for device 00:04.2 PCI: Sharing IRQ 5 with 00:04.3 PCI: Sharing IRQ 5 with 00:09.0 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF cff6f764, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: d400 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface cff6f764 usb.c: call_policy add, num 1 -- no FS yet PCI: Found IRQ 5 for device 00:04.3 PCI: Sharing IRQ 5 with 00:04.2 PCI: Sharing IRQ 5 with 00:09.0 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5 usb-uhci.c: Detected 2 ports hub.c: port 1 connection change hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 100, change 3, 12 Mb/s hub.c: port 1 enable change, status 300 hub.c: port 2 enable change, status 100 usb.c: new USB bus registered, assigned bus number 2 usb.c: kmalloc IF cff6f8a4, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB UHCI Root Hub SerialNumber: d000 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface cff6f8a4 usb.c: call_policy add, num 1 -- no FS yet usb-uhci.c: v1.268:USB Universal Host Controller Interface driver usb.c: registered new driver dc2xx dc2xx.c: v1.0.0:USB Camera Driver for Kodak DC-2xx series cameras usb.c: registered new driver uss720 uss720.c: v0.5:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. LVM version 1.0.1-rc4(ish)(03/10/2001) NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 hub.c: port 1 connection change hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 236k freed hub.c: port 1 enable change, status 300 hub.c: port 2 enable change, status 300 Adding Swap: 530104k swap-space (priority -1) Journalled Block Device driver loaded kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,7), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,9), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.17, 10 Jan 2002 on ide0(3,8), internal journal EXT3-fs: mounted filesystem with ordered data mode. spurious 8259A interrupt: IRQ7. eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 45e1. lp0: using parport0 (polling). lp0: console ready lp0: compatibility mode VFS: Disk change detected on device ide1(22,0) ide-floppy driver 0.97.sv hdd: driver not present VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) ide-floppy driver 0.97.sv hdd: driver not present VFS: Disk change detected on device ide1(22,0) cdrom: This disc doesn't have any tracks I recognize! VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0) VFS: Disk change detected on device ide1(22,0)